Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 23502 High Performance
The E-HPLS and the enormous reach opens up a wide range of applications
- More efficiency with fly jib due to DPS Plus
- Perfect appearance and the highest value retention thanks to KTL
- Additional applications with Power Link Plus
- Increased operating times due to low-maintenance extension system
- High operator friendliness thanks to optional radio remote control
Max. lifting moment | 22.4 |
Max. lifting capacity | 8500 |
Max. hydraulic outreach | 21.3 |
Max. manual outreach | 23.3 |
Slewing angle | 400° |
Slewing torque | 2.8 |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.96 |
Width folded | 2.53 |
Max. operating pressure | 320 |
Pump capacity | 50 - 75 l/min |
Dead weight (std.) | 2583 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | 21.7 mt | 8.1 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 2583 kg | 2350 mm | 2525 mm | 955 mm | 7880.01 mm | 8500 kg | 2700 kg |
B | 21.2 mt | 10.2 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 2764 kg | 2350 mm | 2525 mm | 955 mm | 10060.01 mm | 8300 kg | 1960 kg |
C | 20.7 mt | 12.4 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 2943 kg | 2350 mm | 2525 mm | 1030 mm | 12240.01 mm | 8050 kg | 1460 kg |
D | 20.1 mt | 14.6 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 3120 kg | 2350 mm | 2525 mm | 1070 mm | 14420.01 mm | 7850 kg | 1100 kg |
E | 19.7 mt | 16.8 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 3266 kg | 2350 mm | 2525 mm | 1105 mm | 16650.01 mm | 6700 kg | 820 kg |
F | 19.3 mt | 19.1 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 3379 kg | 2350 mm | 2525 mm | 1105 mm | 18880.01 mm | 6600 kg | 620 kg |
G | 18.9 mt | 21.3 m | 400 | 2.8 | 32.0 Mpa | 50-75 | 3488 kg | 2350 mm | 2525 mm | 1105 mm | 21110.01 mm | 6500 kg | 450 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.